Graphite-modified-PP Shell and Tube Heat Exchanger ,condenser|Graphite-modified-PP Falling Film Absorber|PP horizontal stock tank(storage tank)|PP vertical stock tank(storage tank)|PP vacuum gage tank--Taicang sannai Chemical Equipment Co., Ltd.

Taicang sannai Chemical Equipment Co., Ltd.

Graphite-modified-PP Shell and Tube Heat Exchanger

Graphite-modified-PP Falling Film Absorber

PP absorption tower of tail gas

PP vacuum gage tank

PP ion exchanger

PP horizontal stock tank(storage tank)

PP aquavacuator unit series

PP vacuum filter

Blower fan series

Board、Tubing、Tubing fittings

Plastic blower fan

Plastic equipment

PP equipment

Anticorrosive equipment

PE series micropore filter

Graphite-modified-PP Falling Film Absorber

　[ Characteristics]

Temperature： . the operational temp. is -5 to 125℃, you can use low temperature adsorbent to improve adsorbing efficiency

Pressure： the pressure ≤0.3MPa（form）

Vacuum degree：≤-0.1MPa

The dosage od adsorbent： according to the concentration of HCl ， 10-20m³/h(10m² adsorber ）

Increasing the water quantity and low the temperature can improve adsorbing efficiency

　[uses]

used in the adsorption of HCL, also applied in the adsorption of H₂, S, SO₂, NH₃

Symbol	Uses
a	Gas inlet
b	liquid inlet
c	outlet of cooling water
d	inlet of cooling water
e	Outlet of tail gas
f	The outlet of finished product

　　　　　　　　　

　　　　　　　　　　 Mechanical properties form

graphite-modified PP			pure PP
Property		Data	Property		Data
Sg		1.1	Sg		0.93
Operational temp. ℃		-10 to 125	Operational temp. ℃		-10 to 130
linear expansion coefficient x10^-5/℃		5.7 to 12	linear expansion coefficient x10^-5/℃		6 to 3
Impact strength kgc/cm^²		6.44	Impact strength kgc/cm^²		≥15
tensile strength kg/cm^²		230	Impact strength kg/cm^²		≥300
welding tensile strength kg/cm^²		123	welding tensile strength kg/cm^²		165
coefficient of thermal conductivity, Kcal/m, hr, degree C		2.6	coefficient of thermal conductivity, Kcal/m, hr, degree C
Operational pressure	MPa	≤0.3	Operational pressure	MPa	≤0.25
	Vacuum MPa	-0.1		Vacuum MPa	-0.1
hydraulic test for finished product MPa		0.4	hydraulic test for finished product MPa		0.4

　Specification form of graphite-modified PP Adsorber

Adsorbing Area m²	Adsorbing tube		Size mm			Insatlled size mm		Gas inlet	Liquid inlet	outlet of cooling water	inlet of cooling water	outlet of tail gas	The outlet of finished product
Nominal Area m²	Number of tube	size(mm)	φI	L	H	H1	φ2	a	b	c	d	e	f
6	66	φ20x1.7	310	1750	2630	600	545	80	50	40	40	65	65
10	66	φ20x1.7	310	2500	3400	900	545	80	50	40	40	65	65
15	66	φ20x1.7	310	3800	4700	1300	545	80	40	40	40	65	65
15	104	φ20x1.7	400	2500	3400	900	645	100	50	50	50	80	80
20	132	φ20x1.7	400	2500	3400	9000	645	100	50	50	50	80	80
25	132	φ20x1.7	400	3100	4000	1200	645	100	50	50	50	80	80
30	192	φ20x1.7	500	2600	3500	900	775	100	65	50	50	80	80
40	226	φ20x1.7	500	3000	3900	1000	775	100	65	50	50	80	80
50	226	φ20x1.7	500	3800	4700	1300	775	125	65	65	50	100	100
60	298	φ20x1.7	630	3500	4500	1500	930	150	65	65	65	125	125
80	298	φ20x1.7	630	4500	5500	1500	930	150	65	65	65	125	125
100	588	φ20x1.7	800	3300	4300	1100	1100	200	80	80	80	150	150
120	588	φ20x1.7	800	3600	4600	1200	1100	200	80	80	80	150	150
150	770	φ20x1.7	1000	3500	4500	1000	1300	250	80	80	80	150	150
200	770	φ20x1.7	1000	4200	5200	1500	1300	300	100	100	100	200	200